Home / Küche / painting kitchen cabinets
painting kitchen cabinets

One thing learned from most famous paint designers is that the wooden surface is one of the best options for painting the cabinets. Any material that can be wiped off with sandpaper can be used, but the laminated parts are not so good for painting. The glossy surfaces should always be glossed, and a liquid grinder can be used with a combination of a rag. One thing that is really important and should be considered before painting kitchen cabinets is that preparation is as important as painting.

You should work step by step and first the cabinets should be emptied and all things taken out and cleaned thoroughly and all dirt should be removed as this can cause problems in the lacquered kitchen cabinets. Drawers should be removed, but you should also label them with the sticky notes so that their real place will be known later.

You can also think of removing the entire closet and then painting the picture in a different location, but this is really a time-consuming project that sometimes becomes uneconomical.

The worktops and hinges should also be taped to protect them from paint splashes. Wooden spatulas should be used to fill the holes. One of the best rules to maintain the quality of the painting is that the finish should be hard, the harder the finish, the better the finish.

There is a wide selection of tile types, and the selection can be a bit astonishing. So this is a guide for anyone who wants to buy outdoor tiles. Not all tiles have the same properties. In this way, the correct type of tile should be selected in various circumstances. Exterior tiles should have the ability to resist the climate. Therefore, they should be suitable for those you can use in a kitchen or toilet. In colder atmospheres, they should also have the ability to counter ice. This is accomplished by choosing an item that does not absorb much water (given that the water freezes and grows and causes damage). The type of climate-proof tiles you need is either glassy or impenetrable. Another property that the outer tiles need is that they should be non-slip. A smooth floor can be difficult, especially if it is wet, and therefore has a risk. A non-slip floor has a coarser composition, e.g. B. dimples and less cleaned wrapping material. The problem can also be solved by using small tiles, for example mosaics, in which the joints and joints between them give support. The cheapest tiles are the estimated standard tiles (30 cm x 30 cm). The porcelain stoneware tiles and larger arrangements cause rising costs. Mosaics are also very expensive, but you can make your own mosaics by using a tile cutter to separate larger tiles. Extravagant normal stone is often at the upper end of the value scale and can also be more expensive due to the additional effort involved in changing and fastening.
[gallery columns="2" size="full" ids="52724,52725,52726,52727,52728,52729,52730,52731,52732,52733,52734,52735"]

Leave a Reply

Your email address will not be published. Required fields are marked *

*